UX1000 QSIG integration and MWI with Cisco Call Manager environment

Prepared by:

Paul Gerstner

August 15, 2012

The following lab exercise was performed to determine compatibility between the UX1000 and a Cisco environment comprising CUCM 7.1(5), MGCP Gateway using a Q.Sig PRI.
The key functionality focus was MWI.

Lab environment:

Software versions:

UX1000 – 2.1.2 build 158
E2010 SP1 – build 14.1.218.15
XM2621 – 12.4(15)T14
CUCM – 6.1.4-1000.10
CIPC – 8.6.1

Configuration:

Cisco environment configured mostly per following Integration Note:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/606763nt.pdf

UX1000 relevant config:

Call Routing Table:

Signaling Groups:

Test Results:

MWI off: (Cisco IOS debug isdn q931)

MWI on:

To decode the above Facility Messages, download the TripleCombo tool and MT.exe file, from the locations below and run on a windows server 2003 32-bit platform:
http://www.employees.org/~tiryaki/tc/triple_combo8.exe

http://www.employees.org/~tiryaki/tc/mt.exe

MWI off Facility IE decoded: